custom hardware
CESP Pedals
Brake uses 180kg load cell.
Adjust feel by removing/adding poly dampers and spacers.
Throttle pedal travel can by adjusted as well as the force needed by adjusting spring tension.
Clutch pedal travel can be adjusted as well as the force needed and also the “bite point” simulating where the pressure plate releases in a real clutch.
All pedals work with load cells
Brake uses load cell to measure force applied. Throttle and clutch pedals use small load cells to measure position rather than force applied.
Analog to Digital Conversion
All pedals have the analog signal from the load cell converted to digital at the pedal to eliminate EMI induced interference.
Aluminum and Stainless steel construction
Heavy duty oil filled phosphor bronze bushings
Heavy duty oil filled phosphor bronze bushings are used as opposed to bearings in pedal shafts.
Provision for hydraulic dampers to be added
Height adjustable pedal foot plates on all pedals
Pedals lean back by 14 degrees
Pedals lean back by 14 degrees, but angle can be adjusted for a forward lean for inverted installation.

CESP Hand Brake
150kg load cell
Adjustable
Can be mounted and configured for either horizontal or vertical.
Output proportional to force applied
Analog to Digital Conversion
Analog signal from the load cell converted to digital at the handbrake to eliminate EMI induced interference.
Aluminum and Stainless steel construction
Heavy duty oil filled phosphor bronze bushings

CESP H-Shifter
Short throw 7 speed plus reverse
Solid gear engagement
Gate tension adjustable
Return neutral position force adjustable
Aluminum and Stainless steel construction
Windows Plug and play compatible

order now
